Characteristic

Model	Unit	GA9600-XXA/B
		40	50	60	70
Appearance	/	white
Viscosity	Pa’s	5000	5000	6000	10000
Hardness	ShoreA	40	50	60	70
Density	g/cm³	1.35	1.35	1.4	1.45
Tensile strength	MPa	5	6	5	6
Elongation	%	500	400	300	150
Tear strength	kN/m	20	25	20	20

Usage
The A:B components should be mixed in a 1:1 ratio. To ensure optimal performance, components A and B must be thoroughly mixed. Insufficient mixing may lead to incomplete curing or weakened physical properties. The raw materials can be directly fed into the mixing chamber using automatic metering mixing equipment. For applications sensitive to air, venting in the mold or using vacuum assistance can be helpful. Silicone rubber that has not yet undergone curing can be cleaned with hydrocarbon solvents, but polar solvents such as ketones and alcohols are not suitable.

GA9600-50A/B-2 cures quickly at appropriate temperatures. Curing time depends on the thickness of the product and the actual temperature. If exposed to compounds containing amines, sulfur, or tin bases, curing may be inhibited.

Operation Time
The product contains special additives, so it should be used as soon as possible after mixing components A and B.

Product Safety Message
For relevant material safety data, please contact the GA sales representative. It is important to carefully read the material safety data and product labels to prevent harm to yourself and the environment.

Storage and Shelf Life
Store in a sealed environment with temperatures below 35°C. Refer to the product packaging for the indicated shelf life. Even if the product exceeds the labeled shelf life, it does not necessarily mean the product is unusable. Its usability should be determined based on the actual condition of the product.